TT Quattro Coupe V6-3.2L (CBRA) (2008)
![background image](/audi/tt_quattro_coupe/v6-3.2l_(cbra)/Page-345002.png)
-
Remove oil filler plug -arrow-. (Shown with final drive removed for sake of a better illustration).
-
Disconnect adapter -A- and elbow -B-.
-
Install adapter -A- to stop.
-
Engage elbow -B- with adapter -A-.
-
Route hose over drive axle.
^
Hose must not hang through. It must enter above left rear wheel on vehicle.
-
Make sure valve -arrow- is closed.
-
Screw oil container -A- onto Haldex clutch II filler tool VAS 6291
-
Now open valve -arrow- and hold oil container as shown in illustration.
Haldex clutch is now filled.