TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-762003.png)
-
Install new locking flange seal dry.
CAUTION:
Risk of leaking.
-
When inserting sealing flange, sealing ring must not be damaged or crushed.
-
Press locking flange down against spring pressure and bring it into installation position.
-
Tab - 2 - on locking flange faces toward arrow marking and must lie between tabs - 1 - and - 3 - on fuel tank.
NOTE: - Arrow - points in direction of travel.
-
Tighten locking ring.
TT Coupe:
-
Install rear seat bench.
-
Observe safety precautions after connecting battery.
TT Roadster:
-
Installing fuel tank vehicles with all wheel drive.
