TT Quattro Coupe V6-3.2L (CBRA) (2008)
/Page-27002.png)
CAUTION!
Heat sink on Fresh Air Blower Control Module (J126 ) may be hot.
-
Remove bolt - A -.
-
Remove Fresh Air Blower Control Module (J126) - D - from mount in Fresh Air Blower ( V2).
Installing
Reinstall all removed components in the opposite sequence while observing the following:
‹› When installing, make sure the Fresh Air Blower Control Module (J126) - D - fits correctly inside the Fresh Air Blower (V2) mount.
‹› Make sure the Fresh Air Blower Control Module (J126 ) and Fresh Air Blower (V2) are working properly after they are installed.
-
Check Climatronic Control Module (J255) A/C (heater) control head DTC memory and erase any possible displayed malfunctions Vehicle
Diagnosis, Testing and Information System VAS 5051 under "Guided Fault Finding"
-
Perform a basic setting and output diagnostic test on the A/C (heater) and check the DTC memory one more time. Refer to Vehicle Diagnosis,
Testing and Information System VAS 5051 under "Guided Fault Finding".
