TT Quattro Coupe V6-3.2L (CBRA) (2008)
Suspension Control Module: Service and Repair
Electronic Damping Control Module
Removing
The electronic damping control module (J250) is installed under the right front seat.
-
Remove the right front seat.
-
Cut carpet at markings as shown using a standard carpet knife.
-
Fold carpet up and unclip control module - 2 - - arrows -.
-
Disconnect electrical connector - 1 - and remove control module - 2 -.
Installing
Installation is in reverse order of removal, with special attention to the following:
-
If the Electronic Damping Control Module (J250 ) is replaced, the control position must be reprogrammed.
-
Insert control module access carpet frame.
-
Reprogram control position.