TT Quattro Coupe V6-3.2L (CBRA) (2008)
Wiper Switch: Service and Repair
Windshield Wiper/Washer Switch E22, Removing and Installing
Removing
-
Remove Steering Angle Sensor G85.
NOTE: To provide a better illustration, the following steps are shown with the steering column switch module removed.
-
Release retaining clips with 1.0 mm feeler gauge - item 1 - - arrows - and remove Windshield Wiper/Washer Switch E22.
Installing
Install in reverse order of removal, noting the following:
-
Make sure all fasteners and electrical connectors are properly engaged.