TT Quattro Coupe V6-3.2L (CBRA) (2008)
![background image](/audi/tt_quattro_coupe/v6-3.2l_(cbra)/Page-1957005.png)
-
Slide engine/transmission assembly with a pry bar between engine mount - 1 - and engine support - 4 - until the following dimensions are set:
^
Both head bolts - 2 - must be parallel to edge of support arm - 3
^
A distance of - x - = 16 mm must be present between engine mount - 1 - and engine support - 4 -.
Note:
^
Distance - x - = 16 mm can also be checked with corresponding round stock.
-
Tighten subframe mount to transmission bolts.
-
On transmission side, edges of support arm - 1 - and transmission mount - 2 - are parallel.
^
Dimension - x - same size on both sides of bracket.
-
Tighten subframe mount bolts.
The rest of installation is in reverse order of removal, note the following:
-
Tighten bolts for front part of longitudinal member => Body Exterior - Repair Group 50.
-
Install air filter housing.
-
Install air filter insert.