TT Quattro Coupe V6-3.2L (CBRA) (2008)
![background image](/audi/tt_quattro_coupe/v6-3.2l_(cbra)/Page-1305001.png)
Shift Cable: Service and Repair
Shift Cable and Selector Cable
Removing
-
Remove shift mechanism => [ Selector Mechanism ] See: Shifter M/T/Service and Repair/Selector Mechanism.
-
Bend open tabs - arrows - of base plate for selector mechanism with a screwdriver and remove base plate.
-
Remove gasket.
-
Remove circlips - 1 to 4 - and remove shift cable and selector cable from selector mechanism housing.
Release cable retainer - A - for selector and shift cables - B - as follows: