TT Quattro Coupe V6-3.2L (CBRA) (2008)
![background image](/audi/tt_quattro_coupe/v6-3.2l_(cbra)/Page-1299004.png)
-
Press transmission shift lever - 1 - down in direction of - arrow A -.
-
Engage lock elbow - 2 - by turning slightly in - direction of arrow B - and pressing in direction of - arrow C - at the same time.
This locks selector shaft; it can no longer be moved.
-
Make sure that selector and shift cable - B - are inserted free of tension in retainer - A -.
-
Loosen sleeve - arrow 1 -.
-
Allow sleeve to slide to stop - arrow 2 -.
The cable is now adjusted.
-
Turn lock elbow - A - back into starting position in direction of - arrow 2 - and remove from transmission in direction of - arrow 1 -.