TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
-
Make sure convertible top edge is straight and clean.
-
Rivet fabric to tension strap - 1 - at left and right first.
-
Secure fabric with remaining rivets.
-
Cut off excess tension strap.
-
Pull fabric over tensioning strut at rear and secure it using double-sided adhesive.
-
Secure left and right retaining strips at tensioning strut using 7 Phillips-head screws at each.
-
Stretch convertible top as shown using tensioning cables at front and rear.
-
Align cover on side of frame.
-
Affix bow sleeves using double-sided adhesive tape at bows - 1 - and - 2 -.
-
Affix front roof rail sleeve, from fabric on rear side of front roof rail.
-
Secure retaining strip - 1 - at right and left on rear side of front roof rail using 3 Phillips-head screws for each.