TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
^
When assembling control module and hydraulic unit, ensure that the hydraulic unit valve dome is not canted against the control module solenoid
valves.
^
Using new bolts, screw control module to hydraulic unit.
Tightening torque: maximum 4 Nm.
^
Fit wiring connector on hydraulic pump motor.
^
Bolt ABS unit to bracket.
^
Do not tighten bolts completely. Attaching the individual brake lines is made easier.
^
After tightening brake lines, tighten hydraulic unit.
Further installation is the reverse order of removal.
^
Bleed brake system .
^
Code control module, Refer to On Board Diagnostics.
Work to be carried out after completing repairs .
^
Check the notes on road testing .