TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
-
Insert brake pedal depressor VAG 1869/2 between brake pedal and driver's seat. Depress the brake pedal by at least 60 mm.
-
Connect hose of bleeder bottle to bleeder screws on left front and left rear brake calipers and open bleeder screws.
Note: This dissipates pressure in hydraulic unit.
-
Close left front and left rear bleeder screws.
-
Do not remove brake pedal depressor VAG 1869/2.
-
Release control module connector (arrow -1-) and unplug (arrow -2-).
Note:
-
Protect connector housing of control module against escaping brake fluid. Otherwise corroding contacts can cause a breakdown of the system.
-
Carefully clean a moist or dirty connector housing with compressed air.
-
Lay out sufficient lint-free cloths in area below control module and hydraulic unit.