TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
Brake Caliper: Service and Repair
Front Brake Caliper - FN 3, Servicing
Front Brake Caliper (FN-3), Servicing
Note:
^
Replace complete repair kit when performing service work.
^
New brake calipers are filled with brake fluid and pre-bled.
^
Apply thin coat of assembly paste G 052 150 A2 to brake cylinder, piston and sealing ring.
Brake caliper FN 3
Exploded view
1. Protective seal
2. Bleed screw - 10 Nm
^
Apply thin coat of assembly paste G 052 150 A2 to threads before screwing in
3. Cap
^
Insert in mounting bushing
4. Guide pin - 28 Nm
5. Mounting bushing
^
Insert into brake caliper housing
6. Brake caliper housing
7. Brake carrier
8. Retaining spring
^
Insert both ends in the holes in brake caliper housing
9. Seal
^
Do not damage when inserting piston
10. Piston
^
Apply thin coat of assembly paste G 052 150 A2 to piston
11. Protective seal
^
Pull outer sealing lip onto piston