TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
/Page-1009001.png)
Engine Mount: Service and Repair
Engine Console, Right
Separating locations
-
Separating cut for engine console
-
Separate original joint.
-
Remove front partial section.
-
Drill out spot welds - a - using a 7 mm drill bit.
-
Remove remaining section.
Replacement part
-
Engine console
Preparing new part
-
Drill 7 mm holes for SG plug weld seam.
Welding in
-
Attach new part using straightening bracket.
