TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
^
Install camshaft sprocket.
^
Check installation position.
^
The narrow web of the camshaft sprocket faces outward - arrows - and the marking for No. 1 cylinder TDC is visible.
^
Fit securing bolt for camshaft sprocket (use counter - hold tool 3036).
^
Align camshaft sprocket mark with marking on cylinder head cover.
^
Align vibration damper marking with marking on lower part of toothed belt guard.
Notes: If a piston is at TDC the valves strike the piston when turning the camshaft.. To avoid damage to valves and pistons the pistons must not
be at TDC.
^
Fit toothed belt onto camshaft sprocket.
^
Pull out locking pin - arrow - and loosen piston of toothed belt tensioning element.
^
Unscrew stud - 1 -.
^
Turn crankshaft two complete turns in engine direction of rotation, set again to TDC and check adjustment.
^
Install upper toothed belt guard.
^
Installing ribbed belt and tensioning element.