TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
-
Tighten to 4 Nm
13 - Brake disc
14 - Wheel hub with rotor for speed sensor
-
Rotor is welded to wheel hub
-
Checking rotor for wobble; Refer to Brakes and Traction Control
15 - Retaining clip
-
Check for proper fit
16 - Wheel bearing
-
Always replace, destroyed during removal
17 - Backing plate
18 - Self - locking nut
-
Tighten to 70 Nm + 1/4 -turn (90°)
-
Always replace
19 - Lower lateral control arm
-
Allocate various versions refer to Parts Supplier
20 - Lower bushing
-
Check rubber bushing for damage and tears
21 - Hex - bolt,
-
Tighten to 90 Nm
-
Always replace
22 - Bonded rubber bushing
23 - Longitudinal control arm
24 - Hex - bolt,
-
Tighten to 75 Nm
-
Always replace
25 - Mounting bracket for rear axle
-
After installing, check movement of rear axle, adjust if necessary
-
Can be corrected by sliding mounting bracket
26 - Spacing washer
-
Only installed on vehicles with rough terrain equipment
27 - Stop buffer
-
Tighten to 10 Nm
Wheel bearings, pressing out and in
Special tools and equipment
-
VAG1383A engine/transmission hoist
-
VAG1389A/1 Foot pump with high pressure hose
If available in shop, VAG1389/1 hand pump can also be modified for use as a foot pump.