TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
-
Remove bolts from control module and remove control module.
Notes: When removing the control module - b - make sure that the control module pulled away evenly and is not tilted in relationship to the hydraulic
unit.
-
Cover magnetic coils of the control module with a lint - free cloth.
-
After separating the hydraulic unit from control module, fit transportation protection - 1 - of repair set 1HO 698 311 A on the valve domes.
Attaching the hydraulic unit and control module to the hydraulic unit
Note: There must not be any contamination/dirt around the control module/valve block.
-
Bolt the control module to the hydraulic unit. Observe tightening torque, max 4 Nm (always use original bolts.
-
Connect of hydraulic pump motor.