TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
If Channel 3 value (throttle valve angle) is at 2% or higher:
-
Clean throttle valve control module -J338- (see cleaning instructions below) thoroughly and readapt.
-
Inspect crankcase ventilation system hoses. If sludge or oil deposits are found inside hoses:
-
Clean inside of hoses as necessary.
** For vehicles up to and including M.Y 2002 only: **
-
Remove suction jet pump for brake booster (arrow).
^
Arrow indicates airflow direction (towards intake manifold).
-
Inspect suction jet pump (in area of white circle) for blockage.
If blocked:
-
Replace suction jet pump.
Continued for ALL vehicles: **
Throttle valve control module -J338-,
Cleaning instructions:
-
Remove intake boot from throttle valve control module.
-
Inspect interior surface of throttle valve control module and throttle plate for dirt / oil film.
If interior of throttle valve control module is not dirty:
-
Reinstall intake boot.
-
Continue with diagnosis, (see appropriate Repair Manual group or VAS 5051 Guided Fault Finding).
If interior of throttle valve control module is dirty/oily:
DO NOT replace throttle valve control module for this condition. Over a long period of time it is possible that dirt can accumulate on the inner surfaces.