TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
Throttle Position Sensor: Testing and Inspection
Throttle Position (TP) Sensor And Sender -2- For Accelerator Pedal Position, Checking
Special Tools and equipment
-
VAG1526A
-
VAG1594A
-
VAG1598/31
-
VAS5051 with VAG5051/1
or
-
VAG1551 with VAG1551/3B
Both the Throttle Position (TP) sensor -G79- and the Sender -2- for accelerator pedal position - G185- are located at the accelerator pedal and
communicate the driver's intentions to the ECM completely independently of each other. Both sensors are stored in one housing.
Test sequence
-
Connect VAS5051 tester or VAG1551 scan tool and select the control module for engine electronics using "address word" 01. See: Powertrain
Management/Computers and Control Systems/Testing and Inspection/Scan Tool Testing and Procedures/Scan Tool Testing/Scan Tool Connecting
and Initial Checks/Connecting VAS 5051/VAG1551 Scan Tool
Ignition must remain switched on for this.
Indicated on display:
Rapid data transfer
HELP
Select function XX
-
Press buttons -0- and -8- to select "Read Measuring Value Block" and press -Q- button to confirm input.