TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
-
Remove noise insulation.
-
Fit clamp (special tool - 3094 -) on suction hose between hydraulic fluid reservoir and power steering pump.
-
Disconnect return pipe from fluid reservoir and allow hydraulic fluid to drain out into a suitable container.
-
Fit plug in return outlet on fluid reservoir.
Notes: To protect threads on track rod ballpoint, leave nut on a few turns.
-
Press track rods off steering arms using puller Kukko V /176.
-
Place container underneath to catch hydraulic fluid as it drains out.