TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
-
Insert pressure disc 1 as shown in illustration
1 - Pressure disc E - 39
Position pressure disc so that it is resting completely on bolt heads - 2 -.
-
Attach centering unit with clamp E - 76 - 2.
1 - Hollow piston cylinder HKZ - 15 with hydraulic pressure unit E - 0 - 204 - T
2 - Centering unit with clamp E - 76 - 2
-
Attach bell - 1 -, hollow piston cylinder - 2 - with tie bolt - 3 - and special nut - 4 -.
1 - Bell E - 40
2 - Hollow piston cylinder HKZ - 15
3 - Tie bolt E - 0 - 217
4 - Special nut E - 8 - 214
5 - High pressure hose with quick - release
6 - Pressure disc E - 39
-
Build pressure by pumping foot pump.
-
Check to make sure all tools are properly centered.
-
Place VAG1 383/A transmission lift underneath (danger of accident if parts fall off when pressing off wheel hub).
-
Press off wheel hub from wheel bearing by pumping.
Ejecting wheel housing