TT Quattro Roadster L4-1.8L Turbo (AMU) (2002)
Shifter M/T: Service and Repair
Selector Mechanism, Removing and Installing
Selector mechanism, removing and installing
Removing
-
Loosen hose clamp 4 and pull off intake air duct as well as connector -1- from mass air flow sensor.
-
Remove hose -5- from air filter housing.
-
Remove complete air filter housing by removing bolts -2- and - 3 -.
-
Pry off gear selector cable - A - and gate selector cable - B - using an open - ended spanner- 1 -.
1 = 13 mm open - ended spanner, commercially available
-
Unbolt cable support bracket from transmission - arrows -.
-
Unscrew gear shift knob - 1 -.