TT Quattro Roadster V6-3.2L (BHE) (2005)
Front Door Panel: Service and Repair
Hinged Pocket Assembly, Removing and Installing
Hinged Pocket Assembly, Removing And Installing
-
Remove door trim.
-
Remove insulation.
-
Disengage spring - 1 -.
-
Drill out welds - 3 - (11x).
-
Pull out link - 2 - forward.
-
Press out pins - 4 - on new pocket and fasten pocket with clips - 5 - (as in Parts catalog).
-
Press through pins - 4 - down to level of back of door trim and fasten new pocket with bolts and washers (as in Parts catalog).
-
Or carefully weld pins with soldering iron.