TT Quattro Roadster V6-3.2L (BHE) (2005)
Installing:
-
Push door window into guide rail - 11 - and center with drivers at window lifter.
-
Fit washers - 6 - and clamping washers - 5 - and loosely secure bolts - 7 -.
-
Centrally align door window marks with washers/clamping washers and tighten bolts to 6 Nm.
When installing new door window, proceed as follows:
-
Position window on drivers at window lifter.
-
Slide window into guide rail - 11 - as far as it will go.
-
Keeping window straight, push it upward in guide rail until there is a smooth transition to side window.
-
Then pull window between 0.5 and 1 mm out of guide rail toward the rear.
-
Fit washers - 6 - and clamping washers - 5 -. Tighten bolts - 7 - to 6 Nm.