TT Quattro Roadster V6-3.2L (BHE) (2005)
Brake Caliper: Removal and Replacement
Brake Caliper Piston, FN 3, Removing and Installing
Brake Caliper Piston, FN 3, Removing and Installing
Special tools, testers and auxiliary items required
^
Removing wedge VAS 3409
^
Piston resetting tool
Removing
-
Force piston out of brake caliper housing using compressed air.
Note:
^
Place a piece of wood in the recess to prevent damage to the piston.
-
Remove seal using wedge 3409
Note:
^
Make sure when removing the surface of the cylinder is not damaged.
Installing
-
The surface of the piston and seal must only be cleaned with methylated spirits and then dried.