TT Quattro Roadster V6-3.2L (BHE) (2005)
-
Replace
22
-
Bushing
Removing
NOTE: Replace all cable ties which are opened or cut open when removing the engine. Reinstall the cable ties in the same position when installing
the engine.
-
Note coding on vehicles with coded radio/radio navigation system; if necessary, obtain correct coding.
-
With ignition switched off, disconnect Ground cable (arrow) at battery (in luggage compartment under floor cover).
-
To remove fasteners -1- at lock carrier, press pin -2- in approx. 4 mm (do not push in completely). Then pull fastener out upward.
-
Remove covers (left side) -1- and -2- at lock carrier and above main fuse box (arrows).