TT Quattro Roadster V6-3.2L (BHE) (2005)
-
Remove right sound insulation (arrows).
-
Remove poly V-belt from pulley for vibration damper.
-
Remove bolt for vibration damper using counterhold T10069.
-
Unscrew inner section of oil seal extractor 3203 3 turns (approx. 4 mm) out of outer section and lock with knurled screw.
-
Lubricate threaded head of oil seal extractor, place it in position and, exerting firm pressure, screw it into oil seal as far as possible.
-
Loosen knurled screw and turn inner part against crankshaft until oil seal is pulled out.
-
Clamp flats of oil seal extractor in vise. Remove oil seal with pliers.
-
Clean running surface and sealing surface.
Installing
Note:
Do not lubricate the oil seal before installing.