TT Quattro Roadster V6-3.2L (BHE) (2005)
-
Turn crankshaft via securing bolt for vibration damper 2 revolutions in normal direction of rotation until marking is at TDC (arrow)...
-
...and simultaneously be able to insert camshaft plate T10068 in both camshaft grooves.
Note:
The marked chain links will now be in an undefined position.
If the camshaft plate cannot be inserted:
-
Repeat adjustment of valve timing.
-
Clean old sealing compound from 3 mm bores (arrows) in cylinder head gasket.
Note:
With the cylinder head installed the holes in the cylinder head gasket are only half visible.
-
Clean sealing surfaces on engine and on both covers; they must be free of oil and grease.
-
Check whether dowel pins for lower cover for timing chains are inserted in cylinder block.