TT Quattro Roadster V6-3.2L (BHE) (2005)
Glove Box Lamp Switch: Service and Repair
Glove Compartment Light (Switch) -W6-, Removing And Installing
CAUTION:
Before beginning repairs on the electrical system:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
Special tools and equipment required
-
Hook 3370
Removing
-
Enure light switch to -0- position.
-
Open glove box if necessary.
-
Use hook 3370 to remove right instrument panel end trim -arrow-.
-
Depress both release tabs -arrows 1- and pull switch out of guide at glove box -arrow2-.
-
Disconnect electrical connections.
Installing
Install in reverse order of removal of removal.