TT Quattro Roadster V6-3.2L (BHE) (2005)
/Page-1655001.png)
Battery: Procedures
Battery, Removing and Installing
Battery, Removing And Installing
CAUTION: Before beginning repairs on the electrical system:
-
Obtain the anti-theft radio security code.
-
Switch the ignition off.
-
Disconnect the battery Ground (GND) strap.
-
After reconnecting battery, re-code and check operation of anti-theft radio. Also check operation of clock and power windows according
to Owner's Manual.
Removing
-
Loosen mounting bolts at air filter housing so that battery can be moved rearward at a later point.
-
Remove plastic cover above battery.
-
If installed, remove protective battery case -A- (Velcro).
-
To open cover of main fuse box, press locking lugs (arrows) together.
-
Open main fuse box -B- toward front.
-
Loosen nut -1- (10 mm A/F) and disconnect Ground strap from battery negative terminal.
-
Remove nut -2- (10 mm A/F) and detach main fuse box.
-
Loosen nut -3- (10 mm A/F) and disconnect battery positive cable.
-
Remove bolt -3- (13 mm A/F) and take off retainer plate -2-.
