TT Quattro Roadster V6-3.2L (BHE) (2005)
Suspension Strut / Shock Absorber: Procedures
Front Suspension
Suspension strut, assembly overview
1 -
Self-locking hex nut, 60 Nm
2 -
Stop shell
3 -
Body (suspension strut dome)
4 -
Hex nut, 60 Nm
^
Always replace
5 -
Suspension strut bearing
^
Coat with assembly lubricant G 294 421 A1.
6 -
Deep-groove thrust ball bearing
7 -
Spring plate
8 -
Coil spring
^
Note color code
^
Surface of spring coil must not be damaged
^
Note different spring/shock absorber versions; refer to vehicle data sticker
9 -
Protective sleeve
10 -
Stop buffer
11 -
Shock absorber
^
The same version must be installed on both sides