TT Quattro Roadster V6-3.2L (BHE) (2005)
Shifter A/T: Removal and Replacement
Selector Mechanism, Removing and Installing
Selector mechanism, removing and installing, 02E, 6 Speed Direct Shift A/T, AWD
Removing
-
Shift selector lever to position "D".
CAUTION! Follow steps required when disconnecting battery.
Note: The battery is located in the rear compartment, in the spare wheel well.
-
Disconnect ground strap on battery (in rear compartment) with ignition switched off.
-
Remove selector lever handle.
-
Remove rear center console.
-
Shift selector lever into "P" position.
-
Remove selector mechanism cover.
-
Lift up locking lever - A - and pull off locking cable in direction of arrow.
Note: Do not loosen bolt - B -!
-
Disconnect connector - A - from selector mechanism.
-
Remove 2 nuts - 1 - securing selector mechanism (rear) to body.
-
Remove bolts - 2 -.
-
Lift out selector mechanism.
Do not bend or kink the selector lever cable.