TT Quattro Roadster V6-3.2L (BHE) (2005)
^
Engine not running.
-
Drive vehicle onto a four-column hoist or over an inspection pit in order for it to be absolutely horizontal.
-
Remove center sound insulation fasteners - 1... 3 -.
CAUTION! When working close to the radiator always maintain a safe distance from the fan - danger of injury! The fan may switch on
automatically.
-
Place drip tray V.A.G1306 under transmission.
CAUTION! Wear safety goggles.
Wear protective gloves (acid resistant).
-
Remove gear oil inspection plug - B -. (Plug - B - must be replaced after removing).
Oil level is correct when gear oil is up to lower edge of filler hole in bevel box.
-
If necessary, top up gear oil via hole for inspection plug - B -.
-
Screw in new plug - B -.
Bevel box, refilling with new gear oil
Work sequence