TT Roadster L4-1.8L Turbo (AWP) (2003)
Trim Panel: Service and Repair
Side Trim of Rear Panel
Side Trim Of Rear Panel
1
-
Rear panel side trim
-
Remove rear panel center trim
-
Loosen rear panel cover (without removing the mounting point for the outer seat belt floor assembly) and insert a wedge between rear
panel cover and crossmember for roll bar
-
Disengage rear panel trim - 1 - from rear panel starting at top (grab rear panel through opening at - 2 - ).
-
After installing, make sure there is a smooth transition to door seal and B-pillar.
2
-
Cover