TT Roadster L4-1.8L Turbo (AWP) (2003)
Use only methylated spirits to clean brake caliper housing.
Installing
Note: Before inserting new brake pads, push pistons back into cylinder with the resetting tool. Before pushing the pistons back, draw off brake fluid
the reservoir using a bleeder bottle. Otherwise (particularly if reservoir has been topped off) fluid will overflow and cause damage.
^
Push back pistons.
^
Install brake pad with retaining spring in caliper housing (pistons).
^
Install outer brake pad on brake carrier.
^
Secure brake caliper housing to brake carrier with two guide pins.
^
Install both caps.
Note: Upper cap is combined with wiring retainer for pad wear indicator.