TT Roadster L4-1.8L Turbo (AWP) (2003)
Brake Caliper: Service and Repair
Front Brake Caliper Piston - 2FN, Removing and Installing
Front Brake Caliper Piston, (2FN,) Removing and Installing
Special tools and equipment
^
3409 Removal wedge
^
Piston resetting tool
Removing
^
Force piston out of brake caliper housing using compressed air.
Note:
Place a piece of wood in the recess to prevent damaging the piston.
You can only remove one piston at a time; hold the other piston in the caliper housing using the piston resetting tool.
^
Remove protective seal from piston groove using wedge 3409.
^
Take out piston.
Note: Make sure that the surface of the cylinder is not damaged, when removing.