TT Roadster L4-1.8L Turbo (AWP) (2003)
-
Remove lower air duct.
All models
-
Unscrew coolant pump securing bolts -1- and remove coolant pump -2-.
Installing
Installation is carried out in the reverse order:
-
Clean and smooth down sealing surface for O-ring as required.
-
Moisten new O-ring with coolant G 012 AS D.
-
Install coolant pump. Installation position: plug in housing faces downward.
-
Install toothed belt (adjust valve timing). See: Engine/Timing Components/Timing Belt/Service and Repair
Notes: Follow all the instructions on removing and installing the toothed belt.
-
Install ribbed belt and tensioning element. See: Engine/Drive Belts, Mounts, Brackets and Accessories/Drive Belt/Service and Repair
-
Fill up with coolant. See: Service and Repair
Tightening torque