TT Roadster L4-1.8L Turbo (AWP) (2003)
-
Remove noise insulation panels in center and on the right -arrows-.
-
Remove ribbed belt and tensioning element. See: Drive Belt/Service and Repair
-
Detach coolant expansion tank and power assisted steering reservoir - arrows - and move to one side with the hoses connected.
-
Disconnect vacuum hose from activated charcoal filter and from connection on throttle valve.
-
Unplug electrical connectors on coolant expansion tank and activated charcoal filter.
-
Remove toothed belt guard (top).
-
Set up engine support bracket 10 - 222 A with supports 10 - 222 A/1.
-
Fix retainer 3180 to right lifting eye and attach to engine support bracket 10 222 A.
-
Lift engine slightly with spindle of engine support bracket 10-222 A.
Notes: Lift coolant expansion tank and power assisted steering reservoir and tie them in place on the engine support bracket.