TT Roadster L4-1.8L Turbo (AWP) (2003)
-
Bend back hook of circlip - 2 - with a screwdriver.
Note: If one or more of the circlip hooks break off while being bent, the circlip must be replaced.
-
Remove nut - 3 - with washers - 2 - and - 1 -.
-
Remove both bolts -B- and disconnect multi-function TR switch -A- up over selector shaft.
Installing
Installation is in reverse order. Note the following:
-
Attach Multi-function TR switch - F125 - to selector shaft.
-
Screw in securing bolts -B- of multi-function TR switch hand-tight.
-
Install washers - 1 -, - 2 - and nut - 3 - on selector shaft.
Tightening torque of nuts: 7 Nm