TT Roadster L4-1.8L Turbo (AWP) (2003)
![background image](/audi/tt_roadster/l4-1.8l_turbo_(awp)/Page-2393003.png)
^
Connect voltage tester V.A.G 1527 B to contact 1 (positive) and contact 2 of the connector.
^
Start output diagnostic test mode and activate charge pressure control valve - N75.
^
The LED should flash.
If the LED lamp does not flash or lights up continuously:
^
Connect test box V.A.G 1598/31 to wiring harness for engine control unit. Do not connect the engine control unit itself.
^
Test for open circuit and short to positive or ground in the wiring connections:
^
Repair short circuit or open circuit if necessary.
If the wiring is OK:
^
Replace engine control unit.