TT Roadster L4-1.8L Turbo (AWP) (2003)
![background image](/audi/tt_roadster/l4-1.8l_turbo_(awp)/Page-3679002.png)
Note: In order to be able to insert special tool a soft wooden wedge of approximately 10 cm. diameter must be inserted between rear axle beam
and body.
-
Position special tool and knock guide bearing out of axle body.
Installing
Bonded rubber bushing has mark - 1 - on face.
-
Mark must align with edge (arrow) on trailing arm - 2 -.
-
Mark position of mark - 1 - on bonded rubber bushing.
-
Assemble special tool with bonded rubber bushing.