TT Roadster L4-2.0L Turbo (BPY) (2008)
Trim Panel: Service and Repair
Upper A-Pillar Trim
Upper A-pillar Trim
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
Removing
-
Remove roof frame trim. See: Roof Frame Trim
-
Unclip upper A-pillar trim from body beginning at top using Trim Removal Wedge (3409).
-
Remove upper A-pillar trim up out of ribbed instrument panel ridge.
Installation
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
‹› If trim clamps remain in body mounting points, remove these and insert them in trim.
‹› Check clamps for damage or deformation, replace if necessary.
-
First insert upper A-pillar trim - 1 - in ribbed instrument panel ridge - 2 - in - direction of arrow -.
-
Then clip in upper A-pillar trim and stretch door seal lip over upper A-pillar trim.