TT Roadster L4-2.0L Turbo (BPY) (2008)
Power Door Lock Switch: Service and Repair
Interior Locking Buttons
Removing
-
Switch off ignition and remove ignition key.
-
Remove front door trim.
-
Remove insulation mat in upper area from door trim.
-
Release retaining clips - arrows - and press interior locking button - 1 - out of door trim.
-
Disconnect electrical connector - 2 -.
Installing
Install in reverse order of removal, observing the following:
-
Press interior locking button into switch mount until retaining hooks engage.
-
Install front door trim.