TT Roadster L4-2.0L Turbo (BPY) (2008)
Seat Heater: Service and Repair
Backrest Heating Element, Removing and Installing
Backrest Heating Element, Removing And Installing
Removing
-
Remove seat.
-
Remove the backrest.
NOTE:
-
Electrical wiring harness must not be loosened at seat pan.
-
Set aside backrest toward rear on soft surface.
-
Remove backrest cover and upholstery.
-
Cut out area - A - with electrical connection wire from old heating element.
-
Remove old electrical connection wire.
-
Disconnect electrical wire connections to heating elements at backrest bolsters at positions - B -.
-
Disconnect electrical connection wires to upper backrest heating element at positions - C -.
Installing
-
Align new heating element on backrest surface, remove protective foil and glue new heating element to same positions as old heating elements.
-
Route connecting wires to backrest bolsters through openings in seat cushion without crossing.