TT Roadster L4-2.0L Turbo (BPY) (2008)
Engine Oil: Removal and Replacement
Engine Oil, Draining and Replacing Oil Filter
WARNING! Oil extraction not permitted with various engine types!
Note:
-
Perform oil change at operating temperature.
Special tools and workshop equipment required
-
Oil Extractor -VAG 1782-
-
Hazet Tension Band -2171-1-
-
Oil Filter Wrench -3417-
-
Oil Drain Adapter -T 40057-
Note:
-
Observe waste disposal regulations!
1.8 TFSI, 2.0 TFSI
-
Remove the noise insulation. See: Body and Frame/Sound Proofing / Insulation/Service and Repair
-
Loosen oil filter with -2171-1- or -3417- and remove.
Note:
-
Observe waste disposal regulations!
-
Open oil drain plug or extract engine oil.
-
Clean oil filter sealing surface on engine.
-
Lubricate rubber seal lightly with oil.
-
Install new filter and tighten.
-
Install oil drain plug with new gasket.
-
Fill with engine oil.
Tightening Specifications
Oil filter ................................................................................................................................................................................................................... 22 Nm
Oil drain plug .......................................................................................................................................................................................................... 30 Nm
2.0L TFSI BPY
-
Remove the noise insulation.