TT Roadster L4-2.0L Turbo (BPY) (2008)
^
Remove bolts - arrows - from balance shaft assembly from outside to inside and remove it.
Installing
^
Chain tensioner pre-tensioned
^
Replace all balance shaft assembly bolts.
^
Replace balance shaft assembly bolt gasket.
^
Place intermediate plate as shown on to alignment bushings of differential shaft gear - arrows -.
^
Install balance shaft assembly with oil pump and intermediate plate. Tighten bolts - arrows - from inside toward outside.
Note:
^
Observe different lengths of bolts.
^
Observe tightening sequence
^
Pay attention to centering sleeves.