TT Roadster L4-2.0L Turbo (BPY) (2008)
![background image](/audi/tt_roadster/l4-2.0l_turbo_(bpy)/Page-610011.png)
-
Removing remaining bolts from toothed belt guard - arrows - and remove toothed belt guard from engine.
-
Mark rotational direction of toothed belt.
-
Loosen tensioning roller and remove toothed belt.
-
Then, turn crankshaft back slightly.
Installing
‹› Tightening torques => [ Toothed Belt Drive Assembly Overview ] See: Toothed Belt Drive Assembly Overview
‹› When turning camshaft, crankshaft must not be at TDC. Valves and/or pistons may be damaged.