TT Roadster L4-2.0L Turbo (BPY) (2008)
![background image](/audi/tt_roadster/l4-2.0l_turbo_(bpy)/Page-1320001.png)
Alternator Pulley: Service and Repair
Ribbed Belt Pulley Without Freewheel, Removing And Installing
Ribbed Belt Pulley Without Freewheel, Removing And Installing
Special tools, testers and auxiliary items required
-
Socket 3310
-
8 mm hex socket or TORX T50
Removing
-
Remove generator.
-
If present, press the protective cap off the generator pulley.
-
Counterhold mounting nut using socket 3310 and rotate generator shaft clockwise to loosen it.
-
Remove ribbed belt pulley.
Installing
Install in reverse order of removal, observing the following:
-
Turn the generator shaft counterclockwise to tighten.
-
Clip protective cap onto generator pulley.
Tightening torque
Ribbed belt pulley to generator
65 Nm