TT Roadster L4-2.0L Turbo (BPY) (2008)
Fuse Block: Service and Repair
Relay and Fuse Panel in Engine Compartment E-Box
Relay and Fuse Panel in Engine Compartment E-Box
Removing
-
With ignition switched off, disconnect battery Ground (ND) wire. Refer to => [ Battery, Disconnecting and Connecting ] See: Battery/Service and
Repair/Removal and Replacement/Battery.
-
Remove engine compartment E-box cover by sliding latch in - direction of arrow -.
-
Remove relay - A - and control modules - B - from relay carrier.
-
Remove Suppressor (C24) - item C - from relay and fuse panel and disconnect electrical connector.
-
Release retaining clips - A arrows - and press fuse panel - 1 and 2 - and relay carrier - 4 - back out of relay and fuse panel.