TT Roadster L4-2.0L Turbo (BPY) (2008)
![background image](/audi/tt_roadster/l4-2.0l_turbo_(bpy)/Page-1148004.png)
Installed location of spring washer and thrust washer on outer joint
Outer CV joint, installing
-
Before installing CV joint or triple roller star, splines -A- must be lightly coated with grease used in joint.
-
Install old drive shaft bolt in joint as shown in the illustration.
-
Drive joint onto shaft with plastic hammer until circlip engages.
Inner constant velocity joint, disassembling and assembling
Removing securing ring using Circlip Pliers VW 161 A