TTS Quattro Roadster L4-2.0L Turbo (CDMA) (2009)
Trim Panel: Service and Repair
Lower A-Pillar Trim
Lower A-Pillar Trim
Special tools, testers and auxiliary items required
‹› Trim Removal Wedge (3409)
Removing
Driver side only
-
Pull operating lever - 1 - in - direction of arrow A -. This releases the hood.
At the same time, operating lever - 1 - is guided out of guide in lower A-pillar trim - 2 -.
-
Insert screwdriver - 5 - in gap between operating lever - 1 - and lower A-pillar trim - 2 -.
CAUTION!
‹› When removing, operating lever - 1 - must be pried straight out of its mount in - direction of arrow C - and pulled out straight by hand in -
direction of arrow B - at the same time.
‹› If the operating lever - 1 - is pulled out crooked or tilted, the mount can be damaged. A damaged mount must be replaced.
-
Pry operating lever - 1 - straight out of mount.
-
Check securing clip mount on securing points - 1 - and mount on securing points - 2 - for damage.